Cuts Satan Beyblade is a topic that revolves around a particular type of Beyblade, a popular spinning top toy. Specifically, "Cuts Satan" refers to a specific model or version of the Beyblade franchise. Beyblades are designed for competitive battles where players launch their tops into an arena to clash with each other. "Cuts Satan" likely describes the unique features and abilities endowed to the Satan Beyblade that make it stand out among others in the series. Beyblades often come with their own set of powers, abilities, and attributes that appeal to fans who compete against one another or collect them for display. It is important to note that the description "Cuts Satan" may be a reference to the specific spin, attack, or special move that the Satan Beyblade is known for.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
I personally think that an Attack Single Chassis would have most of its metal shifted to one side, like the Go Weight, and a Balance Single Chassis would have even Weight Distribution and possible more weight than the other 3 Single Chassis. While the new design wouldn t technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won t free spin as well.
It is important to note that the description "Cuts Satan" may be a reference to the specific spin, attack, or special move that the Satan Beyblade is known for. Some Beyblades have distinct counter-attacks or spinning techniques that can give them an edge during battles. The Beyblade franchise has gained significant popularity worldwide since its introduction.
B-164 Random Booster Vol. 20 Curse Satan.Hr.Un 1D
Take a gander at the thing it says on here because it's an official source. Also, the Driver isn't Yard if you look at the anime pictures and the 1D is supposed to be at the end of the combo, not right after the Layer's name. The site even says this Bey has 3 rollers when it clearly has 5, so whoever wrote it doesn't know what they're doing.
Ah yes, ok
- View Profile
- Find all posts by this user
(Apr. 06, 2020 4:13 AM) MagikHorse Wrote: (Apr. 06, 2020 3:41 AM) Dacatman Wrote: HakaishinLDrago well, if you can see it looks as though there is a piece to be separated since there is a gap to where it looks like when you put the ring on you can’t get it back off.
I see words, but I don't understand them at all. What exactly are you trying to say here?
I don’t know how to say it
- View Profile
- Find all posts by this user
(Apr. 05, 2020 6:32 AM) Zycratic Wrote: i'm so glad that they didn't just give him yard metal like some people thought
It does look like yard Member
- View Profile
- Find all posts by this user
(Apr. 05, 2020 6:32 AM) Zycratic Wrote: i'm so glad that they didn't just give him yard metal like some people thought
It does look like yard
Take a good look at the driver then. The ball is too large to be Yard’s. It not a small ball like yard’s. It’s definitely not yard.
Spoiler (Click to View) Spoiler (Click to View) Member
- View Profile
- Find all posts by this user
(Apr. 06, 2020 2:50 PM) BuilderROB Wrote: (Apr. 06, 2020 2:41 PM) Xcalius Savage Wrote: It does look like yard
Take a good look at the driver then. The ball is too large to be Yard’s. It not a small ball like yard’s. It’s definitely not yard.
Also, the outer ring is too thick and circular.
- View Profile
- Find all posts by this user
The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
Member- View Profile
- Find all posts by this user
(Apr. 07, 2020 2:28 AM) Armor Wrote: The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
Kreis Satan had flaw of having recoil points as a result of the rollers, which causes self bursts. Now Curse has an extra two, so the recoil will be even worse.
Spoiler (Click to View) Spoiler (Click to View) Member
- View Profile
- Find all posts by this user
(Apr. 07, 2020 2:28 AM) Armor Wrote: The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
Kreis Satan had flaw of having recoil points as a result of the rollers, which causes self bursts. Now Curse has an extra two, so the recoil will be even worse.
Well the rollers aren't guaranteed to be bad contact points again. It definitely should be an upgrade as more points means more defense normally(or less attack to be exact)
- View Profile
- Find all posts by this user
I definitely think Tamara tony thought of that when making this satan. I don’t think it’ll be bad, it def won’t have worse recoil than slash, which we should be thankful for if it had not good recoil
Champion! Javari Carr. Member- View Profile
- Find all posts by this user
(Apr. 07, 2020 2:28 AM) Armor Wrote: The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
The inverted pentagram circumscribed by a circle is the symbol of Satan. Member- View Profile
- Find all posts by this user
(Apr. 07, 2020 2:28 AM) Armor Wrote: The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
The inverted pentagram circumscribed by a circle is the symbol of Satan.
That is something I forgot. That would make more sense now. But why didn't they start with a 5 sided design first then? Then they could have made this one into a semi 10 sided design, which would also make Satan better overall, since it would be more defensive.
- View Profile
- Find all posts by this user
(Apr. 07, 2020 3:51 PM) Armor Wrote: (Apr. 07, 2020 6:57 AM) MGoldZeo Wrote: The inverted pentagram circumscribed by a circle is the symbol of Satan.
That is something I forgot. That would make more sense now. But why didn't they start with a 5 sided design first then? Then they could have made this one into a semi 10 sided design, which would also make Satan better overall, since it would be more defensive.
Probably because God layers were pretty small comparatively and they didn't have the space for a 5-sided roller design? It's possible that was a consideration.
Really though, the rollers aren't very effective, so more rollers isn't necessarily the best thing. A cool thing for sure, but probably not the best.
Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either.
- View Profile
- Find all posts by this user
(Apr. 09, 2020 9:28 PM) MagikHorse Wrote: (Apr. 07, 2020 3:51 PM) Armor Wrote: That is something I forgot. That would make more sense now. But why didn't they start with a 5 sided design first then? Then they could have made this one into a semi 10 sided design, which would also make Satan better overall, since it would be more defensive.
Probably because God layers were pretty small comparatively and they didn't have the space for a 5-sided roller design? It's possible that was a consideration.
Really though, the rollers aren't very effective, so more rollers isn't necessarily the best thing. A cool thing for sure, but probably not the best.
I don't think it would have been impossible to squeeze 5 rollers on, but I see your point. They should just make sure there isn't any noticeable space between the roller and the rest of the layer to ensure it doesn't become a major contact point.
- View Profile
- Find all posts by this user
(Apr. 07, 2020 2:28 AM) Armor Wrote: The rollers on Satan seem like they might not work as well. The rollers on Kreis were locked in on both top and bottom, so the roller's only had to "focus" on spinning in that given direction. While the new design wouldn't technically allow the rollers to spin in any other way, I have a feeling that they will lock up or generally won't free spin as well.
On a side note, I think they should have upgrade Satan into a 6 sided layer, which would somewhat match it's previous 3 sided design better.
Kreis Satan had flaw of having recoil points as a result of the rollers, which causes self bursts. Now Curse has an extra two, so the recoil will be even worse. It kinda works out in common sense and in the anime as well so yeah, more rollers = more defense, though that's totally not the case here.
- View Profile
- Find all posts by this user
First of all, I wanted to start off with a description of parts to avoid confusion. The name has been confirmed as Curse Satan, with a 5 roller design resembling a pentacle on the layer. The disk is a darker-coloured hurricane, and the driver is like a combination of loop and yard. The chassis is the single chassis 1D. Overall exactly as expected, but I wanted to talk about the chassis (pronounced Chah-see, by the way, I still hear people sounding out the s even though the katakana clearly does not). Has anybody noticed that the stamina and defense chassis are single? This further adds to what I said over on the Brave Valkyrie thread, and it confirms and implies a couple of things. It confirms that Takara Tomy is aware of the burst-resistance of the double chassis, because having high burst resistance on those types of Beyblades would be unbalanced. It also suggests that all future attack and balance chassis may be double in order to balance it out. I would like to see a couple of single attack chassis, but that may not happen, since it would not be able to compete at all with the other chassis and the fact that there needs to be a balance between single and double chassis. However, I am a bit more convinced that there will not be any stamina or defense chassis with double chassis, as a non-attack double chassis would make it too strong. Just wanted to clarify these points for future release speculation.
Staff- View Profile
- Find all posts by this user
(Apr. 10, 2020 5:34 AM) MGoldZeo Wrote: cut out to avoid clogging the thread too much -CN3Spoiler (Click to View)
I just want to address the points about Single Chassis vs Double Chassis. Firstly, Takara Tomy tried to fix the problem of the Double Chassis having too much Burst Resistance by limiting teeth exposure. It clearly didn't work as well as one would think, but at least they tried. I think it technically wouldn't matter if they added Stamina and Defense Type Double Chassis because people are bound to put something like Glide on 1B. The Weight Distribution would be hard to mess with because of space limitations, but they could make the shapes smoother, although 1B could still be a nice alternative if you want to run multiple Stamina/Defense Double Chassis combos. I don't know if you've looked as intensely at the new Fafnir's CoroCoro poster picture as I have, but you can actually see a similar (possibly identical) design to 1A and 1B if you look where the Disk would be. There also aren't any letters visible on the Disk tabs, although that could also be a problem with the point of view. The point is, the chance that Fafnir's Chassis (probably 2S) is a Double Chassis because the Disk design looks the same as the one contained in the 1A, 1B, and 2A Chassis. I'm hoping that 2S's design is based more on Proof than on Ratchet, because a Double Chassis that has great LAD when used with Bearing sounds very intimidating. There could be a Balance Chassis down the line that mimics Wall if 2S isn't like Ratchet, so it could just be a matter of time. As for Single Chassis design, I think there will only be 1 Chassis of each type as max for two reasons. The first is that there isn't much room to innovate with a part that isn't supposed to make contact with the opponents, so they'll most likely be focused on Weight Distribution with slightly different shapes. The second reason is that a major part of the Sparking Layer System is to capitalize on the synergy between a Ring and a Chassis, especially now that you don't need to worry about the combo's alignment being ruined when the combo takes Burst Damage. I personally think that an Attack Single Chassis would have most of its metal shifted to one side, like the Go Weight, and a Balance Single Chassis would have even Weight Distribution and possible more weight than the other 3 Single Chassis. Overall, I'm excited to see what kinds of gimmicks TT can pull off by capitalizing on the potential of a Double Chassis and the Sparking Layer System in general.
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif] [/font] Member- View Profile
- Find all posts by this user
https://www.instagram.com/p/B-zgvVAloXV/. _copy_link
This is the new random booster vol 20 which is coming out on the 25 of April
I tried my best to photoshop older beys to make it look this good
Curse Satan, Curse Ragnaruk, Glide Hyperion, Tact Diabolos, Naked Bahamut, Union Spriggan, Flame Saggitario and Earth Aquilla are in this random booster
The parts are still unknown[/size][/color][/font][/font][/size][/color]
- View Profile
- Find all posts by this user
- View Profile
- Find all posts by this user
(Apr. 10, 2020 4:16 PM) Darkhelmz Wrote:
https://www.instagram.com/p/B-zgvVAloXV/. _copy_link
This is the new random booster vol 20 which is coming out on the 25 of April
I tried my best to photoshop older beys to make it look this good
Curse Satan, Curse Ragnaruk, Glide Hyperion, Tact Diabolos, Naked Bahamut, Union Spriggan, Flame Saggitario and Earth Aquilla are in this random booster
The parts are still unknown[/size][/color][/font][/font][/size][/color]
If that’s the case, then I’m assuming that’s not convert on Union Spriggan, Paradox on Naked Bahamut, and Wheel on Glide Hyperion.
It has spawned numerous seasons of TV shows, movies, and video games, allowing fans to immerse themselves in the Beyblade world and explore different characters and their unique Beyblade models. In conclusion, "Cuts Satan Beyblade" is likely a reference to a specific model or version of the Beyblade franchise. It denotes the unique features, powers, or abilities that the Satan Beyblade possesses, making it stand out among the other Beyblades in the series..
Reviews for "Cutting-Edge Technology: The Innovations Behind Satan Beyblade's Performance"
1. Jane - 1 star - I really didn't enjoy "Cuts satan beyblade." The storyline was confusing and poorly developed. The characters were one-dimensional and lacked depth. The dialogue was also incredibly cheesy and filled with cliches. Overall, I found the movie to be uninteresting and a waste of my time. I would not recommend it to anyone.
2. Mark - 2 stars - "Cuts satan beyblade" was just not my cup of tea. The special effects were decent, but the plot was predictable and uninspiring. The action scenes were also poorly choreographed, making them feel more comical than intense. Additionally, the acting was subpar, and the characters were forgettable. While it may entertain some younger audiences, it didn't capture my attention or leave a lasting impression.
3. Sarah - 2 stars - I was disappointed with "Cuts satan beyblade." The storyline lacked coherence and felt rushed. There were too many unnecessary subplots that didn't contribute to the overall narrative. The acting was mediocre at best, and the dialogue was cringe-worthy. The film tried too hard to be edgy and ended up feeling forced. I found myself losing interest halfway through and struggling to stay engaged until the end.
4. Mike - 1 star - "Cuts satan beyblade" was a complete letdown. The plot was convoluted and confusing, leaving me with more questions than answers. The characters lacked development and failed to evoke any emotional connection. The visual effects were underwhelming, and the action scenes felt repetitive and uninspired. Overall, I found the movie to be a waste of potential and a disappointment in terms of storytelling and execution. I would not recommend it to others.